Brand:SODI
Model:PCQ-1400
PCQ - 1400 Intelligent Invasive Road Detector is installed in the pavement asphalt or concrete, with the road after the installation is complete. When the design, we fully consider the upgrading replacement and maintenance problem of invasive road detector, its contains two parts of the shell and internal circuit, and also can be removed, the removal of replacement of work only takes a few minutes.
Main Function:
Road surface temperature.
Slippery road surface.
Road conditions. (wet/dry/wet/cream/ice/snow/ Residual salt content, moisture condensation/ice thickness of black ice/water/slurry mixture)
By testing the dry degree of ground to calculate the friction of the ground.
Performance Characteristics:
Two connected additional sensors measuring temperature below ground;
A variety of frequency measurement;
To measure the concentration of salt and frozen temperature;
Can detect the thickness of the water on the surface of the sensor;
Compact structure, easy to install, convenient maintenance;
Measurement time is less than 2 seconds, low energy loss;
Technical Indicators:
Road Conditions: Dry, Half Wet, Wet, Dew, Residual Salt Content, Moisture, Ice or Snow, The Frost, Black Ice And Freezing Temperatures; | Conditions of Icy Roads: Measuring Range: - 40 ℃ ~ 0 ℃ Accuracy: +/- 0.1 ℃ Resolution: 0.1 |
Consumption Of Electricity: < 200 MA | |
Output Interface, RS485, Baud Rate From 2400 To 38400 - Bit/S (Default: 19200); | Water Film Height: Measuring Principle: Radar Measuring Range: 0 ~ 8 mm Measuring Accuracy: 0.1 mm Resolution: 0.01 mm |
Cable Length: Standard 25 m, Maximum 100 m | |
Protection Grade: IP68 | Conditions Of Wet Surface Measuring Principle: Thermistor Pavement: Wet/Dry/Wet/Black Ice Dew Detection: With/Without Measuring Range: - 50 ℃ ~ 80 ℃ Accuracy: + / - 0.1 ℃ Resolution: 0.1 |
Power Supply: 9 ~ 14 VDC, 12 V | |
Working Temperature: -50 ℃ ~ +80 ℃ | |
Work Humidity: 0 ~ 100%RH | |
Measurement Precision: ±0.1 ℃ | |
Resolution: 0.1 |
